11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com
F-5500 Thermal Mass Flow Meter Manual 06/17 - 2030 / 107023 Page 92
Model F-5500
APPENDICES
Warranty
(a) ONICON warrants that the products furnished under this Agreement will be free
from defects in material and workmanship for a period of two years from the date
of shipment. The customer shall provide notice of any defect to ONICON, within one
week after the Customer’s discovery of such defect. The sole obligation and liability of
ONICON, under this warranty shall be repair or replace, at its option, without cost to the
Customer, the defective product or part.
(b) Upon request by ONICON, the product or part claimed to be defective shall
immediately be returned at the Customer’s expense to ONICON. Replaced or repaired
products or parts will be shipped to the Customer at the expense of ONICON. ONICON
shall have the right of final determination as to the existence and cause of defect.
(c) There shall be no warranty or liability for any products or parts that have been
subject to misuse, accident, negligence, failure of electric power or modifications by
the Customer without the written approval of ONICON. Final determination of warranty
eligibility shall be made by ONICON. If a warranty claim is considered invalid for any
reason, the Customer will be charged for services performed and expenses incurred
by ONICON, in handling and shipping the returned unit.
(d) The liability of ONICON shall be limited to replacing or repairing, at its option, any
defective parts which are returned. Labor and related expenses incurred to install
replacement parts are not covered by this warranty.
(e) As to replacement parts supplied or repairs made during the original warranty
period, the warranty period for the replacement or repaired part shall terminate with the
termination of the warranty period of the original product or part.
(f) The use of these products is under exclusive control of the purchaser and ONICON
specifically denies any responsibility for the calibration of units and/or accuracy
of work performed or the safety of the system in which ONICON products is used.
EXTERNAL SAFETY DEVICES MUST BE USED WITH THIS EQUIPMENT.
(g) No warranty is made with respect to custom equipment or products produced
to Buyer’s specifications except as specifically stated in writing by ONICON and
contained in the agreement.
(h) THE FOREGOING WARRANTY CONSTITUTES THE SOLE LIABILITY OF ONICON,
AND THE CUSTOMER’S SOLE REMEDY WITH RESPECT TO THE PRODUCTS
AND IS IN LIEU OF ALL OTHER WARRANTIES, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, LIABILITIES, AND
REMEDIES. EXCEPT AS THUS PROVIDED, ONICON, DISCLAIMS ALL WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
Appendices: Warranty
Warranty
Appendices: Returning Your Meter
Returning Your
Meter
What to Expect
During Servicing
To Next Page
Loading...