En-15
Specifications
Specifications and features are subject to change without notice.
Rated output power: 44 watts minimum continuous
power per channel, 8 ohm loads,
2 channels driven at 1 kHz, with a
maximum total harmonic distortion
of 0.08 % (FTC)
70 watts minimum continuous
power per channel, 4 ohm loads,
2 channels driven at 1 kHz, with a
maximum total harmonic distortion
of 0.7 % (FTC) (North American)
2 ch
×
44 W at 8 ohms, 1 kHz,
2 ch Driven of 0.08 % (IEC)
2 ch
×
70 W at 4 ohms, 1 kHz,
2 ch Driven of 0.7 % (IEC) (European)
Maximum effective output power: 2 ch
× 85 W at 4 ohms, 1 kHz,
2 ch driven
(JEITA) (Asian)
THD+N (Total Harmonic Distortion+Noise):
0.08 % (Rated output power)
Damping factor: 95 (1 kHz, 8 h)
Input sensitivity and impedance (unbalance):
150 mV/100 kh (LINE)
3.0 mV/47 kh (PHONO MM)
Rated RCA output level and impedance:
150 mV/2.2 kh (LINE OUT)
Phono overload: 94 mV (1 kHz 0.5 %)
Frequency response:
10 Hz - 100 kHz/
i
1 dB,
j
3 dB (LINE 1)
Tone control characteristics: ±10 dB, 100 Hz (BASS)
±10 dB, 10 kHz (TREBLE)
Signal to noise ratio: 97 dB (LINE, IHF-A)
77 dB (PHONO MM, IHF-A)
Speaker impedance: 4 h - 16 h
Power supply: AC 120 V, 60 Hz (North American)
AC 220 - 240 V, 50/60 Hz (European)
Power consumption: 140 W (North American)
155 W (European)
0.3 W (Stand-by, North American)
0.4 W (Stand-by, European)
20 W (No-sound, North American)
25 W (No-sound, European)
Dimensions (W × H × D):
435 mm × 129.5 mm × 332.5 mm
(17-1/8
q
× 5-1/8
q
× 13-1/16
q
)
Weight: 6.5 kg (14.3 lbs)
∫ Audio inputs
Digital (North American and Continental European):
DIGITAL IN (D1 COAXIAL, D2 OPTICAL)
Sampling frequency (PCM): 32, 44.1, 48, 88.2, 96, 176.4,
192 kHz (COAXIAL)
32, 44.1, 48, 88.2, 96 kHz
(OPTICAL)
Analog: LINE IN 1-4, LINE IN 5 (front)
PHONO (MM)
∫ Audio outputs
Analog: LINE OUT
Speaker outputs: SPEAKERS L/R
Phones: PHONES (
ø 6.3 mm,
1/4
q
)
∫ Others
RI: 1
A-9010_eng.book 15 ページ ２０１４年１２月２５日 木曜日 午前１０時４８分
To Next Page
Loading...
