Onkyo A-9050

22
En
You can select to output sound from Speakers A,
Speakers B, or both A + B.
Note
• While headphones are connected, this setting is disabled.
• When this setting is set to A + B, the impedance of speakers is
restricted. For further details, see “Connecting Your Speakers”
(➔ page 12).
■ Operating with the remote controller
■ Operating on the integrated amplifier
Tip
• The default level is 0.
Selecting Speakers A and Speakers B
1
Press SPEAKERS repeatedly on the integrated
amplifier.
The LED of the selected speakers lights.
SPEAKERS
button
A LED B LED
Adjusting the Volume
1
Press VOLUME q/w repeatedly.
1
Use the volume controller.
VOLUME q/w
Volume controller