Onkyo A-9050 Owner's Manual

5
En
Features
A-9050 Integrated Digital Amplifier
• Three-stage Inverted Darlington Circuitry
• Digital Inputs (Optical/Coaxial)
• Wolfson 192 kHz/24 bit DACs withDIDRC Circuitry Inside (WM8718)
• Phase Matching Bass Technology
• 1.6 mm Full Flat Chassis
• 75 W/ch (1 kHz, 8 ohms, 0.08 % THD, 2ch Driven FTC)
• WRAT (Wide Range Amplifier Technology)
• DIDRC (Dynamic Intermodulation Distortion Reduction Circuiry)
• High Current Low Impedance Drive
• 10,000 µF Capacitor × 2
• Optimum Gain Volume
• Aluminum Front Panels and Volume Knob
• Direct Mode Switch
A-9030 Integrated Digital Amplifier
• Three-stage Inverted Darlington Circuitry
• Phase Matching Bass Technology
• 1.6 mm Full Flat Chassis
• 65 W/ch (1 kHz, 4 ohms, 0.08 % THD, 2ch Driven IEC)
• WRAT (Wide Range Amplifier Technology)
• High Current Low Impedance Drive
• 8,200 µF Capacitor × 2
• Optimum Gain Volume
• Direct Mode Switch

Onkyo A-9050 Specifications

General

Output level	175 mV
Damping factor	60
Amplifier class	A
Output impedance	2200 Ω
Audio output channels	2.0 channels
Peak power per channel	75 W
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.08 %
AC (power) in	Yes
Audio (L/R) in	5
Audio (L/R) out	1
Digital audio coaxial in	2
Speakers connectivity type	RCA
Purpose	Home
Product color	Silver
Volume control	Rotary
Connectivity technology	Wired
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	160 W
Package weight	10500 g

Weight and Dimensions

Depth	330.3 mm
Width	435 mm
Height	139 mm
Weight	820 g