18
Connecting the Power Cord
When the power cord is connected to the AC outlet,
the FR-X7A enters Standby mode. The STANDBY
indicator lights up.
Understanding Common Operations
Press STANDBY/ON on the unit or on the remote con-
troller.
If you press the same button again, the unit will turn
off and enter Standby mode.
Tip
When you start playing (or turn on the power to) an Onkyo
CD recorder or cassette tape deck that is connected to the
FR-X7A via an cable and RCA/phono audio cables, the
power to the FR-X7A is automatically turned on. Also, if you
turn on or off the power to the FR-X7A, the power to such a
device is automatically turned on or off (standby).
Operating with the unit
Turn VOLUME clockwise to increase the volume or
counterclockwise to decrease the volume.
Using the remote controller
Press VOLUME on the remote controller.
You can select CD, MD, FM, AM, or connected exter-
nal audio/video equipment (CD-R, TAPE, LINE, DIGI-
TAL) as the audio source.
To select the audio source, press the INPUT or
button repeatedly.
To wall outlet
STANDBY
indicator
INPUT
buttons
VOLUME
STANDBY/ON
STANDBY
indicator
INPUT buttons
VOLUME
/
STANDBY/
ON
Turning the unit on and off
Adjusting the volume
Selecting a source
/
CD MD FM AM
CD-RTAPELINEDIGITAL
To Next Page
Loading...
Need help?
General
