41
Various Ways to Play CDs and MDs
Different playback modes are available in addition to normal playback. These modes are also
available for CD dubbing.
You can select and store track numbers (up to 25) in a desired playback order.
By combining this function with the CD dubbing function, you can easily create an MD of your favorite recordings.
(You cannot combine this function with the CD double-speed dubbing function.)
•You can execute this function only when the input source is CD or MD and the unit is stopped.
To select a track number in memory:
Turn MULTI JOG or press / on the remote con-
troller repeatedly during Memory playback.
To check the track numbers in memory:
Press / on the remote controller while the CD/
MD is stopped.
To erase a track number from memory:
• While in Memory playback mode, and the CD/MD is
stopped, press EDIT/NO/CLEAR or CLEAR on the
remote controller. Each press erases the last track
number stored in memory.
• If you change the playback mode, all data stored for
Memory playback will be erased.
• When you eject the disc, all programmed data will
be erased.
Memory playback
3
3
1
2
DISPLAY
Number buttons
(See pages 21
and 23.)
(These buttons do
not operate during
MEMORY
playback.)
Press on the
selected source.
CLEAR
/
/
2
3
1
1
Press YES/
MODE
repeatedly until the
MEMORY indicator lights in the dis-
play.
2
Turn MULTI JOG to select the first
track you want to play back, then
press MULTI JOG.
To select the next track to be played,
repeat this step.
You can also use the number buttons on
the remote controller to select a track.
To cancel a track number stored in
memory:
Press EDIT/NO/CLEAR. Each press
erases the last track number stored in
memory.
Note
If the total playing time of the programmed
tracks exceeds the following time length, the
FR-X7A does not display the total time. How-
ever, this does not affect Memory playback.
CD: “--:--” appears when the total time meets
or exceeds 99 minutes 59 seconds.
MD: “---:--” appears when the total time
exceeds 511 minutes 59 seconds.
You can program up to 25 tracks for a CD
and MD. If you try to program more tracks,
the unit displays “Memory Full.”
MEMORY
The MEMORY indicator lights.
MEMORY
Track number to be
stored in memory
The total time of pro-
grammed tracks
3
Press on the selected
source to start Memory play.
or
/
SOURCE
MEMORY
The playing track number
To Next Page
Loading...
Need help?
General
