46
Editing Groups (Move, Combine and Erase)
You can perform three editing functions: move a group to change the order, combine two
groups into one, and erase tracks in a group.
Erasing a group—G.Erase
All tracks in the specified group will be erased.
Moving a group—G.Move
Enables you to move a group.
Combining groups—G.Combine
Enables you to combine two groups into one.
Combining two groups that are located apart:
(G.Move + G.Combine)
G.Combine enables you to combine the selected
group with the preceding adjacent group. To combine
two groups that are listed apart from each other, first
use the G.Move function to move one group next to
the other group, then use the G Combine function to
combine the groups.
Notes regarding edit functions
• The edit information is written in the TOC of the MD when
you eject the MD or when the recorder enters Standby
mode. When the recorder is writing this information, the
TOC indicator lights up or flashes. During this time, do
not disconnect the power cord or move or shake the sys-
tem. (See “When the TOC indicator lights up or flashes”
on page 7.)
•You cannot use the edit functions when the MEMORY,
RANDOM, 1TR, or 1GR indicator is lit. Place the recorder
in Normal Playback mode. (See “Cancelling the playback
mode” on page 43.)
•You can execute this function only when the input
source is MD and the unit is stopped.
•To cancel the operation, press MD .
Outline of edit function
Combining two edit functions
Erasing tracks in the specified group —
G.Erase
1
2
1
3
2-5
DISPLAY
1
Insert the MD, then select MD as
the source.
2
Press GROUP, then turn MULTI
JOG to select a group to erase.
3
Press EDIT/NO/CLEAR and turn
MULTI JOG until “Erase” appears
in the display.
4
Press MULTI JOG.
“Erase??” is displayed, enabling you to
confirm the operation.
5
Press MULTI JOG.
All tracks in the group are erased, and
“Complete” appears in the display.
The groups are renumbered.
1 2 34
134
123
Deleting the selected track
Renumbering the tracks
To Next Page
Loading...
