Onkyo D-SX7A - Naming an MD and its Tracks, and Preset Channels; Naming MD Discs or Tracks; Naming MD Groups; Entering Names

52
Naming an MD and its Tracks, and Preset Channels
You can name an MD and its tracks, as well as AM/FM preset channels.
•You can enter up to 100 alphabetical characters per
name.
• Use a recordable MD with the record-protect tab
closed.
1 Insert the MD, then select MD as the source.
2 To name the disc, proceed to Step 3.
To name a track, select the track.
3 Execute “Entering a name” as described in the
right column.
1 Insert the MD, then select MD as the source.
2 Press the GROUP button, then turn MULTI JOG
to select a group.
3 Follow the steps described in the “Entering a
name” section in the right column.
Notes
• If the MD is record-protected or a playback-only disc, you
cannot name the disc. (See page 6.)
• Before naming the disc, check that no particular track is
selected. If a track is selected, press MD .
•You can name a track during recording or playback. How-
ever, if recording or playback of the next track starts, the
naming process may not be completed correctly.
• If the MEMORY, RANDOM, 1TR, or 1GR indicator is lit,
you cannot name the disc.
• Information such as names will be recorded to the TOC of
the MD when you eject the MD, turn off the unit, or stop
recording. Therefore, do not disconnect the AC power
cord (mains lead) or vibrate the unit when the TOC indi-
cator is lit or flashing. (See page 7.)
After you select the preset channel to name, exe-
cute “Entering a name” as described in the right
column.
You can enter up to eight characters per name.
Naming an MD disc or track
Naming a group on an MD
Naming a preset channel
M D
“MD”
indicator
Entering a name
1
Press EDIT/NO/CLEAR and turn
MULTI JOG until “Name In?”
appears in the display.
2
Press MULTI JOG.
3
Press DISPLAY repeatedly until
the character type you wish to
enter appears in the display.
You can select one of the following
character entry modes:
• “A” for capital letters
• “a” for small letters
• “1” for numbers and symbols
•“” for Easy Name* (see next page).
* This mode cannot be selected when you
are naming a preset channel.
4
Turn MULTI JOG to select the
character (or title when in Easy
Title mode), then press it to enter.
Repeat this step for the next character.
If you wish to change the type of char-
acters, repeat Step 3, then proceed
with this step.
SOURCE C D TIMER M D M D C D
The character type appears.