57
Editing Tracks—Continued
•You can execute this function only when the input
source is MD and the unit is stopped or paused.
•To cancel the operation, press MD .
If you move a track, the track may end up belonging to
a different group. See the example below.
Moving the selected track – Move
1
Insert the MD, then select MD as
the source.
Use a recordable MD with the record-
protect tab closed.
2
Turn MULTI JOG to select a track
to move.
3
Press EDIT/NO/CLEAR and turn
MULTI JOG until “Move?”
appears in the display.
4
Press MULTI JOG.
The destination track number appears,
pointed to by an arrow.
1
2-6
3
1
DISPLAY
SOURCE
Destination track number
5
If necessary, turn MULTI JOG to
change the destination track
number.
6
Press MULTI JOG to move.
“Complete” appears in the display.
The selected track is moved and all the
tracks are renumbered from the top.
Moving a track to a different group
The selected number will
become this number.
1 2 354
13 54 2
12 53 4
Moving the selected track
Renumbering the tracks
1 Tr ~ 9 Tr 10 Tr ~ 19 Tr 20 Tr ~ 25 Tr
20 Tr ~ 25 Tr
20 Tr ~ 25 Tr
1G 2G 3G
1 Tr ~ 10 Tr 11 Tr ~ 19 Tr
1G 2G 3G
15 Tr
1G 2G 3G
6 Tr
Moving Tr.15 to Tr.6
A track moved from Tr.15 to Tr6 now
belongs to Group 1, instead of Group 2.
Before moving a track
To Next Page
Loading...
