45
Using the MD Group Function—Continued
•You can execute this function only when the input
source is MD and the unit is stopped.
This function enables you to remove a track from the
group.
•You can execute this function only when the input
source is MD and the unit is stopped.
This function enables you to cancel all the groups on
the disc.
•You can execute this function only when the input
source is MD and the unit is stopped.
This function enables you to cancel only the selected
group.
Group Out
1
Turn MULTI JOG to select a track
you wish to remove from the
group.
2
Press EDIT/NO/CLEAR and turn
MULTI JOG until “XX Tr Gr.Out?”
appears in the display.
3
Press MULTI JOG.
“Complete” appears, and the selected
track is removed from the group.
1G
1G 2G
2G
10 tracks 10 tracks
9 tracks 10 tracks
Group Out
Track removed from the group
Cancelling all groups
1
Press EDIT/NO/CLEAR and turn
MULTI JOG until “Gr.Release?”
appears in the display.
2
Press MULTI JOG.
“Complete” appears, and all the groups
are cancelled.
Cancelling the selected group
1
Press GROUP.
2
Turn MULTI JOG to select a group
you wish to cancel.
3
Press EDIT/NO/CLEAR and turn
MULTI JOG until “G Release?”
appears in the display.
4
Press MULTI JOG.
“Complete” appears, and only the spec-
ified group is cancelled.
To Next Page
Loading...
