48
Editing Groups (Move, Combine and Erase)—Continued
•You can execute this function only when the input
source is MD and the unit is stopped.
• The name of the lower-numbered group is assigned
to the combined group.
•To cancel the operation, press MD .
Combining groups — G.Combine
1
Insert an MD, and select MD as
the source.
2
Press GROUP, then turn MULTI
JOG to select a group you wish
to combine.
The selected group will be combined
with the preceding group. Therefore,
you must select the second of the two
groups to be combined.
3
Press EDIT/NO/CLEAR and turn
MULTI JOG until “G.Combine?”
appears in the display.
1
2
2-5
3
1
DISPLAY
4
Press MULTI JOG.
The numbers of the selected group and
the preceding group appear.
5
Press MULTI JOG.
The groups are combined, and “Com-
plete” appears in the display.
Subsequent groups are renumbered.
Preceding
group
Selected
group
1 2 34
145
14523
Combining the groups
Renumbering the groups
To Next Page
Loading...
