Onkyo FR-V3

52
Message list
The following table explains the various messages
that appear in the display.
Message Meaning
Blank Disc A recordable MD without disc or track names is
inserted.
Cannot Copy An attempt was made to make a second digital
copy from a digitally dubbed MD (see “Rules for
digital recording” on the right column).
Cannot Edit An attempt was made to edit a playback-only disc.
Cannot Rec An attempt was made to record onto a playback-
only disc.
Cannot Set An attempt was made to set a timer while another
timer is operating, or an attempt was made to set
the clock using ACCUCLOCK.
D. In Unlock The digital equipment (CD player, DAT, etc.) has
not been connected properly. Otherwise, the
connected digital equipment is not operating
properly.
Disc Error The disc is abnormal (scratched or missing a
TOC).
Disc Full The disc is full (see “System limitations” on page
54).
FULL An attempt was made to enter a character over the
maximum character capacity while naming.
Impossible The disc could not be edited.
MD Writing The unit is writing the recorded or edited contents
to the MD.
Mecha Error An error occurred in the unit’s internal mechanism.
Memory Full An attempt was made to store a 26th track or a
31th channel.
Name Full The naming capacity of the disc or unit has
reached its limit.
No Change The name has not been changed.
No Disc There is no disc in the unit.
No Track The inserted disc has a disc name but no tracks.
Over In pause mode (when playing is paused), the
(Fast Forward) button was pressed to the end of
the disc.
Protected The inserted disc is record-protected.
Recording An attempt was made to switch to another source
while recording.
Retry Error The recording attempt failed due to a consecutive
disturbance because of the scratches on the MD or
vibration.
Sorry An attempt was made to combine tracks which can
not be combined, or to divide a track at the
beginning of it.
TOC Error The reading of the disc or the recording onto the
U-TOC Error disc failed.
Rules for digital
recording
CD player DAT deck
MD recorder
Digital output terminal
Digital input terminal
Line (analog)
output terminal
Audio connecting
cable
Line (analog)
input terminal
Digital output terminal
Digital input terminal
Playing
MD recorder
Optical cable or
coaxial digital
connecting cable
MD
First-generation MD
recorded via
digital-to-digital
connection
MD recorder
Optical cable or
coaxial digital
connecting cable
MD recorder
Recording
Playing
Recording
Others
Guide to the serial copy management system
Since your MD unit uses the Serial Copy
Management System (SCMS), MDs recorded through
the digital input terminal cannot be used to make
subsequent copies to other MDs through the digital
output terminal. The following diagram shows a
system for making copies through the digital or
analog terminals.
Rule 1
You can record digital source (CD, premastered MD,
and DAT equipment with a sampling frequency of
44.1 kHz) to a recordable MD through the digital input
terminal.
However, you cannot make subsequent copies from
the recordable MD to other recordable MDs through
the digital output terminal. Subsequent copies can
only be made through analog output terminal.
Das private Onkyo Archiv © von Dirk Gardi
Der Online-Treff zum Thema Onkyo!
www.gardi.de
Das private Onkyo Archiv © von Dirk Gardi
Der Online-Treff zum Thema Onkyo!
www.gardi.de
Das private Onkyo Archiv © von Dirk Gardi
Der Online-Treff zum Thema Onkyo!
www.gardi.de