EasyManuals Logo

Onkyo HT-R490 User Manual

Onkyo HT-R490
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
Check that the following accessories are supplied with the HT-R490.
AM loop antenna × 1
FM indoor antenna × 1
Remote controller × 1
(RC-446M)
Features
Batteries (AA, R6 or UM-3) × 2
Amplifier Features
55 Watts minimum of continuous RMS power to each of the
five channels into 8 from 20 Hz to 20 kHz with no more than
0.08% THD (FTC rated)
Wide Range Amplifier Technology (WRAT)
Extended Frequency Response (20 Hz to 100 kHz)
Full bandwidth power to all 5 main channels
High-current, low-impedance 6-Ohm drive for all five channels
Oversized electrolytic capacitors
State-of-the-art linear PCM 96 kHz/24-bit DACs for all channels
Fully discrete output stages for all five channels
Optimum Gain Volume Circuitry
Massive isolated transformer
2 Large high-grade extruded-aluminum heat sinks
A/B speaker drive
Tone control (bass, treble) for front L/R speakers
Auto-protection circuitry
Audio/Video Features
Dolby
∗
Digital, DTS
∗∗
, Dolby Pro Logic II decoding
All Channel stereo
7 DSP soundfields
High Definition DSP
Late night mode (on, off)
•“Easy-set speaker configuration
Extensive bass management circuitry
5.1-Channel input
Automatic signal detection
2 Assignable digital inputs (1 coaxial, 1 optical)
2 S-video inputs and 1 output
3 A/V inputs
2 Audio inputs
Dedicated line-level subwoofer pre out
Full input/output cassette and VCR loops
7 Sets of heavy-duty multiway speaker binding posts (dual
banana-plug compatible)
FM/AM Tuner Features
Outstanding selectivity and sensitivity
30 FM/AM random presets
FM auto tuning
Red FM stereo indicator
75-Ohms antenna input
FM indoor antenna supplied
AM loop antenna supplied
Other Performance Features
Precision digital speed-sensitive volume control
Absolute volume display
Separate PC (printed circuit) boards for audio and video sources
Large bright fluorescent display
2-Mode display dimmer (normal, dim)
Individual input selectors for each source
Audio mute (remote controller)
Sleep timer (remote controller)
Battery-free memory backup
2 Switched AC convenience outlets with a total 120 watts
max.
Heavy-duty power cord
Large non-resonant feet
Heavy-gauge, anti-resonant, reinforced-steel chassis
Vibration-resistant cover
Brushed aluminum front panel
Powerful preprogrammed remote
* Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic and the double-D symbol are trademarks of
Dolby Laboratories. Confidential Unpublished Works. ©1992-1997
Dolby Laboratories, Inc. All rights reserved.
**Manufactured under license from Digital Theater Systems, Inc. US Pat.
No.5,451,942 and other worldwide patents issues and pending. DTS
and DTS Digital Surround are trademarks of Digital Theater Systems,
Inc. ©1996 Digital Theater Systems, Inc. All rights reserved.
Supplied accessories

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo HT-R490 and is the answer not in the manual?

Onkyo HT-R490 Specifications

Amplifier Section IconAmplifier Section
continuous average power output (FTC) - 8 ohms55 watts per channel min. RMS
continuous average power output (FTC) - 6 ohms70 watts min. RMS
continuous power output (DIN)75 watts × 5 at 6 ohms
maximum power output (EIAJ)100 watts × 5 at 6 ohms
total harmonic distortion0.08% at rated power (Front)
IM distortion0.08% at rated power (Front)
damping factor60 at 8 ohms (Front)
input sensitivity and impedance - LINE200 mV, 50 kohms
input sensitivity and impedance - MULTICHANNEL INPUT (FRONT L/R, SURROUND L/R, CENTER)200 mV, 50 kohms
input sensitivity and impedance - MULTICHANNEL INPUT (SUBWOOFER)36 mV, 50 kohms
input sensitivity and impedance - DIGITAL 2 (COAXIAL)0.5 Vp-p, 75 ohms
output level and impedance - Rec out (TAPE, VIDEO 2)200 mV, 2.2 kohms
output level and impedance - Pre out (SUBWOOFER)1 V, 2.2 kohms
frequency response20 Hz to 100 kHz, +1/–3 dB
RIAA deviation20 Hz to 20 kHz, ±0.8 dB
tone control - Bass±10 dB at 50 Hz
tone control - Treble±10 dB at 10 kHz
signal-to-noise ratio - CD/Tape100 dB (IHF-A)
Tuner Section IconTuner Section
FM tuning range87.5-108.0 MHz (50 kHz steps)
FM usable sensitivity - Mono11.2 dBf, 1.0 µV (75 ohms)
FM usable sensitivity - Stereo17.2 dBf, 2.0 µV (75 ohms)
FM 50 dB quieting sensitivity - Mono17.2 dBf, 2.0 µV (75 ohms)
FM 50 dB quieting sensitivity - Stereo37.2 dBf, 2.0 µV (75 ohms)
FM capture ratio2.0 dB
FM image rejection ratio40 dB
FM IF rejection ratio90 dB
FM signal-to-noise ratio - Mono76 dB
FM signal-to-noise ratio - Stereo70 dB
FM alternate channel attenuation55 dB
FM selectivity50 dB (DIN)
FM AM suppression ratio50 dB
FM total harmonic distortion - Mono0.2%
FM total harmonic distortion - Stereo0.3%
FM frequency response30 Hz-15 kHz, ±1.0 dB
FM stereo separation45 dB at 1 kHz
AM tuning range530-1, 710 kHz (10 kHz steps)
AM usable sensitivity30 µV
AM image rejection ratio40 dB
AM IF rejection ratio40 dB
AM signal-to-noise ratio40 dB
AM total harmonic distortion0.7%
General IconGeneral
power supplyAC 120 V, 60 Hz
power consumption3.4 A
dimensions (W × H × D)435 × 150 × 339 mm
weight9.7 kg, 21.4 lbs.

Related product manuals