EasyManuals Logo

Onkyo HT-RC630 User Manual

Onkyo HT-RC630
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
FIRMWARE UPDATE-2/2
USB Update (service mode)
[Procedure]
Overwriting is also possible.
1. Turn on the unit. It takes some time to start after you switch on the unit.
2. Select the USB input source.
3. Connect the USB storage device to USB port (rear panel) on the unit. Wait until Initializing of USB/NET finishes.
4. Hold down [DISPLAY] button and then press [ON/STANDBY] button twice.
Main version will be displayed, and HYBRID STANDBY indicator will start to flash.
5. Press [RETURN] button. “USB -> ALL_D” will be displayed.
6. Select “USB -> ALL_D” by [PRESET(left/right)] cursors and [TUNING(up/down)] cursors,
then press [ENTER] button, updating will begin.
7. Wait until update (about 7 minutes) is completed. When the update ends, “Completed!” is displayed.
(If you leave it, it automatically turns standby mode. )
8. Press [ON/STANDBY] button, and the unit turns on.
9. Check the new FW version number.
<Note>
If the procedure might not be succesful, please select “USB -> ALL_M”.
TX-SR333 / HT-R393 / HT-RC630

Other manuals for Onkyo HT-RC630

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo HT-RC630 and is the answer not in the manual?

Onkyo HT-RC630 Specifications

General IconGeneral
Output level100 mV
Receiver typeSurround
Frequency range5 - 100000 Hz
Input sensitivity200 mV
Audio output channels5.1 channels
Signal-to-Noise Ratio (SNR)100 dB
Dynamic power per channel (3 Ohm)160 W
Dynamic power per channel (4 Ohm)125 W
Dynamic power per channel (8 Ohm)85 W
Power output per channel (1KHz@6 Ohm)120 W
Power output per channel (20-20KHz@8 Ohm)- W
HDMI in6
Audio (L/R) in7
Composite video in4
Digital audio coaxial in2
Component video (YPbPr/YCbCr) in1
Speakers connectivity type-
BluetoothYes
Ethernet LANNo
Bluetooth version2.1+EDR
Bluetooth profilesA2DP, AVRCP
AM band range522 - 1710 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Preset stations quantity40
Product colorBlack
Audio decodersDolby TrueHD, DTS-HD Master Audio
Damping factor60
Apple docking compatibilityNot supported
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.3 W
Power consumption (typical)330 W
Package weight10500 g
Weight and Dimensions IconWeight and Dimensions
Depth321 mm
Width435 mm
Height150 mm
Weight8100 g

Related product manuals