Onkyo TX-8211 - Recording a Source

20
Recording a source
TX-8211
Recording
Playback
Please read the instruction manuals con-
cerning the operation of each unit.
1. Insert a blank tape into the tape deck.
2. Press the button (other than TAPE-2
MONITOR) of the source from
which you want to record.
e@ When FM or AM is selected, set the
tuner to the station you want to record
from.
e When TAPE-I is selected, it will record
to the TAPE-2.
e@ When either FM, AM, PHONO or CD
is selected, you ure able to record to
both the TAPE-I and TAPE-?.
3. Put the tape deck in the recording
mode. Begin playing the source.
Set the proper recording level using the
controls on the tape deck used for record-
ing. Also, if any controls (bass, treble etc.)
on this unit are changed during recording
and dubbing operations, the tone effects
will not change.
NOTE:
Recording from TAPE-2 to TAPE-1 is not
possible.
*Tapé-to-Tape Dubbing ="
1. Load the original tape in deck 1! and
the blank tape in deck 2.
. Press the TAPE-1 button,
Put tape deck 1 in the playback mode
and tape deck 2 in recording mode.
ww