4
Listening to your system
4
4
25
30
6
Changing the TV format setting of Graphical
User Interface
If the Graphical User Interface screen is not displayed
correctly, it may be that the TV system is set incorrectly for
your country or region.
1
Switch the receiver into standby.
2
While holding down
TUNE
on the front panel, press
ON/STANDBY
.
Each press switches between
PAL
and
NTSC
.
•
Default: PAL
Changing the frequency step of AM Radio
If you find that you can’t tune into stations successfully, the
frequency step may not be suitable for your country/region.
Here’s how to switch the setting:
1
Switch the receiver into standby.
2
While holding down
TUNE
on the front panel, press
ON/STANDBY
.
Each press switches between 9K STEP and 10K STEP.
•
Default:
9K STEP
•
The functions that can be set differ depending on the input signal or speaker settings.
DIRECT STEREO SURR DSP Using the headphones
Analog signal Other signals
Speaker Setting
Channel Level
Speaker Distance
Bass/Treble
A/V SYNC
Music Optimizer
DUAL MONO
Fixed PCM
LATE NIGHT
HDMI Audio
Auto Delay
Center Image
(
NEO:6 only)
To Next Page
Loading...
