14
DIM:
Set display brightness.
DISPLAY:
Set to turn off the display
automatically after 3 seconds of idle
when no user operation.
AUX / OPTICAL / HDMI
Operation
1 Ensure that the unit is connected
to the TV or audio device.
2 Press the
button repeatedly
to select the AUX, OPTICAL ,
HDMI IN, HDMI ARC mode. The
selected mode will show on the
display.
3 Operate your audio device directly
for playback features.
4 Press the
/ button to adjust the
volume to your desired level.
Tip:
• The unit may not be able to decode
all digital audio formats from the
input source. In this case, the unit
will mute. This is NOT a defect.
Ensure that the audio setting of the
input source (e.g. TV, game console,
DVD player, etc.) is set to PCM or
Dolby Digital (Refer to the user
manual of the input source device
for its audio setting details) with
HDMI IN / HDMI ARC / OPTICAL
input.
• When the DOLBY DIGITAL audio
format is entered, the Sound Bar
display shows DOLBY AUDIO.
• When the PCM audio format is
entered, the Sound Bar display
shows PCM AUDIO.
• When entering non-PCM or DOLBY
DIGITAL audio formats, if there’s no
sound output from the unit and the
display show NO SUPPORT.
• The Sound Bar will still function
when connected via other
methods (such as a Digital Optical
cable) but these are unable to
support all of the Dolby features.
Given this, our recommendation is
to connect via HDMI, in order to
ensure full Dolby support.
Bluetooth
®
Operation
Pairing the unit with a Bluetooth
®
device to listen to music:
First time pairing
1. Press the button on the unit or
button on the remote control
to select Bluetooth
®
mode. The
display will show NO BT.
2. Activate your Bluetooth
®
device
and select the search mode.
“100043839” will appear on your
Bluetooth
®
device list.
3. Select “100043839” enter “0000”
for the password if necessary. The
unit will voice “Paired” and the
display will show BT.
Pairing a new device after rst
time pairing
1. In Bluetooth
®
mode, press and
hold the
/OK button to clear all
pairing. The unit will enter pairing
mode. The unit will voice “Pairing“
and the display will show “PAIR“.
2. Follow step 2-3 to pair your
Bluetooth
®
device.
To Next Page
