Onstep GOTO - 5 Smart Hand Pad

Pin 7: Aux4, typically used for a Home SW on Dec or Alt but can be used any
purpose (dew heater for instance, on/off switch, etc.). Not wired and not enabled.
Pin 8: Encoder 1A, encoder 1 input A
Pin 9: Encoder 2A, encoder 2 input A
5 Smart Hand Pad
The user can Configure, Initialize & Align the mount, Park, and find/goto celestial
objects using the Smart Hand Pad. The objects include Moon, the Planets, and several
catalogs: NGC/IC, Herschel 400, Messier, the named bright stars, and variable stars
etc, about 30,000 objects in total.
The main display is the Alt, Azm, or RA and Dec that the telescope is currently
pointing at; you can toggle between the Alt/Azm and RA/Dec by single clicking the
center button. A small telescope icon with an H under it, means the telescope is in the
Home position When the telescope is slewing, a double triangle will show. When it is
tracking, a single triangle will show, as well as the pier side, and the tracking rate ('s'
for sidereal).
 Press any of the N, S, W, E buttons to move the telescope
 Press the center (+) button to wake up the screen
 Press it again to cycle through status displays (RA/Dec coordinates, Alt/Az,
Local/Sideral Time)
 Quickly press the center button twice to get to the Speed menu
 Long press the center button for the menu
o Goto
o Sync
o Align
o Parking
o PEC
o Settings
 Select a menu by the Up or Down button, then Right to enter that menu
11