F: Increase currently selected Feature
5.4 Use Key functions:
When at the main info display page, pressing [N],[S],[E],[W] guides in that di-
rection at the rate selected (see below).
When at the main info display page, a click on [+] cycles through the display
of RA/Dec, Alt/Az, Time, and (optionally) ambient conditions.
o When doing an align, a click of the [+] key instead accepts the align
star once you've centered it using [N],[S],[E],[W]
When at the main info display page, a double click on [+] brings up the Fea-
ture key selection menu where you can scroll to among guide rate, reticle
light, utility light, focuser, or rotator for the [f] and [F] key action. Pressing the
[W] key at this point makes the selected menu item the Active Feature.
o Pressing the [f] (decrease) or [F] (increase) keys then adjusts the se-
lected feature
o When doing an align, a double click of the [+] key instead allows se-
lecting a different align star (after the goto to the prior align star com-
pletes). Also, during an align, the [f] and [F] keys work only for guide
rate selection.
A long press on [+] brings up the menus
o The [N],[S] keys then move up/down the menu selections.
o The [W] key selects a menu item.
o The [E] key navigates back to the prior level.
5.5 Icons
Alignment Star #1
Alignment Star #2 (#3 thru #8 not shown)
Alignment Star #9 (last possible)
Telescope is at home position. Tracking is OFF
Unknown error. Tracking has stopped
Telescope position exceeds user defined Meridian limit. Tracking has stopped
13
To Next Page
Loading...
