6
WARNING: Operation of Rotary Brush: Always keep hands away from the live spinning
motor. Please turn o the power before maintaining the machine.
• Do not use ammable liquid; do not operate the machine close to or in the place where
there is ammable liquids, vapors or combustible dust.
• This machine is not equipped with explosion-proof motor. If this machine is used in the
place where there is ammable vapors, liquids or combustible dust, electric motor may
generate spark during the start and operation, which may cause ash re or explosion.
• Do not pick up ammable materials or reactive metals.
• The battery releases hydrogen. Please keep away from sparks or open ame. The battery
cabin must be kept open when charging.
FOR SAFETY: 1. Please do not operate the machine:
• When contacting ammable liquid or getting close to ammable vapors, otherwise
it may cause explosion or ash re.
• Unless having been trained and authorized to operate the machine.
• Unless having read and understood the operation manual.
• Under the inuence of alcohol or drugs.
• While using a cell phone or other types of electronic devices.
• Unless mentally and physically capable of following machine instructions.
• With brake disabled.
• If the machine is not in proper operating condition.
• If the battery emits an unusual odor. Move the machine to a ventilated area and con-
tact Customer Service immediately.
• If the battery is leaking any substance. Avoid contact with battery substance and
contact Customer Service immediately.
• If the battery becomes excessively hot. Disconnect battery charger. Move the ma-
chine to a ventilated area and contact Customer Service immediately.
FOR SAFETY: 2. Before starting the machine:
• Please ensure that all safety equipment is in place and operated correctly.
• Follow safety guidelines concerning wet oors.
• Make sure all safety devices are in place and operate properly.
• Check brakes and steering for proper operation.
• Adjust seat and fasten seat belt (if equipped).
FOR SAFETY: 3. When using the machine:
• Please drive slowly when encountering a slope and slippery surface.
• Follow site safety guidelines concerning wet oors.
• Please wear anti-skid shoes when operating the machine.
• Use brakes to stop the machine.
• Keep all parts of the body inside the operator station while the machine is moving.
• Use care when reversing the machine.
• Reduce speed when turning.
To Next Page
Loading...
Need help?
General
