To Next Page

To Previous Page

• NEVER allow children to play on or around the machine.

• NEVER carry passengers on the machine.

• Always follow safety and trac rules.

• Report machine damage or faulty operation immediately.

• Observe the mixing ratio and processing instructions on the chemical vessel.

• In areas that are too dark to safely see the controls or operate the machine unless

operating / headlights are turned on.

• In areas with possible falling objects unless equipped with overhead guard.

FOR SAFETY: 4. Before leaving or maintaining the machine:

• Stop and place the machine on a stable and at surface.

• Shut down the machine.

• Remove the key.

FOR SAFETY: 5. When repairing and servicing the machine:

• Avoid moving the parts. Please do not wear loose jacket, jewelry, shirt or over

sleeves.

• Before conducting service on the machine, please rst disconnect the battery wir-

ing.

• Block machine tires before jacking machine up.

• Jack machine up at designated locations only. Support machine with jack stands.

• Use a hoist or jack that will support the weight of the machine.

• Do not push or tow the machine on inclines with the brake disabled.

• When treating battery or battery wiring, please wear protective gloves and eye pro-

tection.

• Avoid contacting battery acid.

• Do not hose down or spray this machine with high pressure water.

• Use the replacement parts provided or recognized by the manufacturer.

• All maintenance must be carried out by qualied maintenance personnel.

• Relevant personal protective equipment (PPE) should always be worn when servic-

FOR SAFETY: 6. When transporting the machine:

• Shut down the machine. Remove the key.

• Drain tanks before loading.

• Lower scrub head and squeegee before tying down the machine.

• Use a recommended ramp when loading/unloading into/o truck or trailer.

• Use ramp, truck or trailer that will support the weight of the machine and operator.

• Use a winch. Do not push the machine onto/o the truck or trailer unless the load

height is 380 mm (15 in) or less from the ground.

• Block machine tires.

• Tie machine down to truck or trailer.

• Use tie-down straps to secure the machine to truck or trailer

Onyx RX32 User Manual

Questions and Answers: