To Next PageTo Next Page
Need help?Do you have a question about the Opex Falcon+ and is the answer not in the manual?
General| Brand | Opex |
|---|---|
| Model | Falcon+ |
| Category | Industrial Equipment |
| Language | English |
Assign a sub-type to an item before scanning. Requires enabling Page Sub-Types in General Page Type Parameters.
Fine-tune image quality using brightness, dropout colors, and Gamma settings on the Adjust Capture Parameters screen.
Methods for rescanning items to improve image quality or correct order, using Rescan Feeder or Pre-Feed mechanisms.
Remove items from a batch when the machine is stopped, with options for deleting the last item or items to the end of the batch.
Mark scanned items as invalid by applying a VOID stamp to the image, confirming its invalid status.
Manage multiple batches by suspending and resuming them, allowing exit from job runs without closing batches.
Procedure to finish scanning, close the current batch, and then start a new batch or exit the job run.
Use the Batch Editor to recover and fix incomplete batches that may occur due to improper closure of CertainScan.
Utilize the IDAssist system for item identification and automated actions via sensors, not available in Stack Feed mode.
Leverage an external keypad for efficient execution of functions like page type selection, job control, and image rotation.
Step-by-step guide to clear paper jams by accessing scanner and transport areas and removing obstructions.
Instructions for removing paper from output bins by pulling items from the side of the bins.
Steps to clean the monitor and recalibrate touch sensitivity via Tablet PC Settings by connecting the USB cable.
Procedure for accessing and replacing standard and graphics printer cartridges, including resetting ink count via Diagnostics.
Guide on installing upper and lower stacker fingers, and correctly aligning stacker assembly parts for proper function.
Regular cleaning of system components like conveyors, feed assembly, and image sensors to ensure efficient operation and prevent issues.
Provides tools for managing and creating statistics reports, including individual and summary report types.
Guide on generating individual or summary reports based on selected criteria, job runs, operators, and date/time ranges.
Defines terms used in the General Information section of statistics reports, such as Job Name, Operator, and Run Type.
Explains terms for system performance indicators like Input, Output, Jam Rate, Feed Rate, and formulas for calculation.
Details performance metrics like Active Job Time, Jam Time, Idle Time, and lists reasons for rejected items and jams.
An alphabetical list of terms used throughout the Falcon+ documentation, providing definitions for key concepts and features.
