10 Introduction
Falcon+ Operator Manual
OPEX Corporation
1.1. About the Manual
This manual contains information about the OPEX Falcon+ series of scanners
and its operational procedures and safety-related components, including:
• safety information, safety hazards and precautions
• main component identification and function
• system specifications
• minor maintenance and cleaning
This information is intended for use by the main operator of the Falcon+
machine. The operator can power up the machine, start a job and feed product
onto the conveyor for sorting into bins. They can also perform minor
maintenance. Read all information thoroughly before attempting to operate or
service this equipment.
This manual will be updated to reflect equipment design changes, part number
changes, or to correct errors (a table detailing the document revision history
can be viewed on page 5
). Be sure to retain the latest electronic release of the
manual for your reference. The latest release can be downloaded in PDF
format at www.opexservice.com
.
1.1.1. Manual navigation aids
This manual is designed primarily for use on a tablet device. To improve
navigation, the manual contains blue underlined links you can click on or tap to
go directly to a particular page or web address. In addition, all items in the
“
Table of Contents” as well as the bookmarks in the side bar of the PDF file can
be clicked or tapped to navigate directly to a particular page. Make sure to use
the latest version of Adobe
®
Acrobat Reader
®
* for optimal performance.
*Adobe and Acrobat Reader are registered trademarks of Adobe Systems Incorporated.
To Next Page
Loading...
