Opex Falcon+ - Adjusting the Image Quality

Operation 81
Falcon+ Operator Manual
OPEX Corporation
4.3.8. Adjusting the Image Quality
Fine tune the quality of the item images by pressing Adjust on the Run screen.
The Adjust Capture Parameters screen will appear, where you can modify the
gamma, brightness and dropout colors for all or one image (see Figure
Figure 4-44).
Figure 4-44: Adjust Capture Parameters Screen
Table 4-6: Adjust Capture Parameters Screen Buttons
Gamma
When enabled, the Gamma buttons allow you to adjust the
balance between bright and dark areas of the image.