Opex Falcon+ - Page 128

64 Operation
Falcon+ Operator Manual
OPEX Corporation
Table 4-3: General Information - Details
Parameter Description
Start Date
Date and time at which the run-screen was entered. Displays
the date before pressing Go, displays the time after.
Type of Run
Set in the job parameters, potentially reset when run-screen
was entered; Default job setting or selected by operator at the
start of the batch.
Operator
Name
Determined at login time.
Input Number of pieces processed for the current job.
Output Number of pieces placed in a batch for the current job.
Rejects Number of rejects for the current job.
Feed Rate Pages/hr for the current job.
OCR Read %
Successful OCR Reads / Items with an OCR area defined, for
the current execution.
MICR Read %
Successful MICR Reads / Items with a MICR defined, for the
current execution.
OCR MICR
Read %
Successful Optical MICR Reads / Items with a MICR defined,
for the current execution.
Combined
MICR %
Successful Combined MICR Reads / Items with a MICR
defined, for the current execution.
Run Time
Sum of time during which the track was running for the current
job.
Jam Time Sum of time that the jam dialog was shown for the current job.
Idle Time
Sum of time during which the track was not running for the
current job.
Active Job
Time
Sum of time between entering the run-screen and exiting the
run-screen.
Processing
Buffers
Regarding the Image-Manager, used to store uncompressed
images as items are processed.