Opex Falcon+ - Page 134

Operation 67
Falcon+ Operator Manual
OPEX Corporation
Set Sequence
Number
Ordinal number of selected item within its set/transac-
tion.
Group Number Number of groups.
Group Sequence
Number
Ordinal number of selected item within its group.
Scan Sequence
Number
For the selected item. Ordinal number with regard to
scanning. Rescans will change this number for a given
item.
Pages in Batch Including batch ticket & voided items.
Batch Creation
Date
Date (and time) the batch was created (when first piece
was scanned).
Batch Received
Date
Set by operator, otherwise today's date.
Batch Processed
Date
Set by operator, otherwise today's date.
Batch RefIDs
Shown only if RefID enabled configured in batch
parameters.
ScanLink Vendor
Batch ID
Shown only if RefID enabled configured in batch
parameters.
ScanLink
Customer Batch ID
Shown only if RefID enabled configured in batch
parameter.
Data File Path As per job's batch parameters.
Image File Path As per job's batch parameters.
Snippet File Path As per job's batch parameters.
Table 4-4: Batch Information - Detailed View
Parameter Description