70 Operation
Falcon+ Operator Manual
OPEX Corporation
Character Read
Combined results of magnetic and optical MICR reads;
Generic display of OCR1 or MICR character reads on a
given piece to keep jobs consistent. If more info is desired,
bring up the info panel for all the OCR and MICR details.
OCR Read 1 - 5 Results of OCR regions 1-5, as per pagetype configuration.
Magnetic MICR
Read
Results of MICR region, as per pagetype configuration.
Barcode Results
Results of Barcode 1 (same as Barcode 1 below, but visible
by default).
Barcode Results 1
Results of Barcode 1 (same as Barcode Results above, but
not visible by default).
Barcode Results
2-6
Results of Barcode 2-6, as per page type configuration.
Marks Results
Indicates whether or not a mark was detected for those
marks defined in the page type.
Bin Number Final destination of the selected piece.
Front Blank Page
Status
Indicates whether or not the front side of the selected item
was judged blank. Also states what % of pixels were filled.
Back Blank Page
Status
Indicates whether or not the back side of the selected item
was judged blank. Also indicates what percentage of pixels
were filled.
Page Ref ID 1
Page RefID. Visible in RunScreen if RefID #1 is defined in
Job. Always visible in Batch Editor.
Page Ref ID 2
Page RefID. Visible in RunScreen if RefID #2 is defined in
Job. Always visible in Batch Editor.
Page Ref ID 3
Page RefID. Visible in RunScreen if RefID #3 is defined in
Job. Always visible in Batch Editor.
Processing Time
Used
Percentage of allowable time used for this piece. Allowable
time is a function of track speed.
Unique Piece ID Ordinal number per execution. Used mainly for diagnosis.
Table 4-5: Piece Information - Detailed View
Parameter Description
To Next Page
Loading...
