86 Operation
Falcon+ Operator Manual
OPEX Corporation
Figure 4-46: Inject Item
4. When finished, press the
Rescan Feeder
button again.
The slot will no longer be illuminated and feeding will resume at the auto-
feeder
To use the Rescan Feeder with multi-feed detection in the event of a jam:
1. When the Rescan Feeder slot is flashing, press and hold the
Rescan
Feeder
button until the Rescan Feeder slot begins to flash rapidly.
2. Wait for the jam dialog to disappear.
3. Inject the item(s) one at a time into the slot.
4. When finished, press the
Rescan Feeder
button again.
5. The slot will no longer be illuminated and feeding will resume at the auto-
feeder.
Using the Rescan Feeder when the machine is paused:
If the operator pauses the machine, the Rescan Feeder slot will flash blue at a
0.5 second interval; alerting the operator that it may be selected to inject a
single or multiple items into the machine. If the operator activates the Rescan
Feeder, the slotted opening in the scan bed cover will become solidly lit blue;
alerting the operator that the Rescan Feeder is now active and the machine
expects items to be injected there.
To Next Page
Loading...
