Operation 87
Falcon+ Operator Manual
OPEX Corporation
To use the Rescan Feeder without Multi-Feed detection during the
paused state:
1. When the Rescan Feeder slot is flashing, press the
Rescan Feeder
button.
2. Wait for the slot to become solidly lit.
3. Inject the item(s) one at a time into the slot.
4. When finished, press the
Rescan Feeder
button again.
The slot will no longer be illuminated and feeding will resume at the auto-
feeder.
To use the Rescan Feeder with Multi-Feed detection during the paused
state:
1. When the Rescan Feeder slot is flashing, press and hold the
Rescan
Feeder
button until the Rescan Feeder slot begins to flash rapidly.
2. Inject the item(s) one at a time into the slot.
3. When finished, press the
Rescan Feeder
button again.
The slot will no longer be illuminated and feeding will resume at the auto-
feeder.
To Next Page
Loading...
