Opex Falcon+ - Page 264

132
Falcon+ Operator Manual
OPEX Corporation
A.1.2. General Information Statistics
The following table lists the terms that appear in the General Information
section of the statistics report.
Table 1: General Information Statistic terms
Term Definition
Job Name
Name of job reported. If you are creating a summary report
for two or more jobs, All appears in this field.
Operator
Name of operator included in report. If you are creating a
summary report for two or more operators, All appears in
this field.
Run Type
Type of run determined by setting the Default Batch Type
Batch parameter. Can be:
•Singles
•Multis
•Stub Only
• Check Only
•Multis With Pages
• Unstructured Transactions
• Page Only
• Structured Transactions
•Mix
The Default Batch Type parameter can also be set in the
Modify Batch Information window that appears when first
starting a job, if the Prompt Operator for Process & Recv
Dates Batch parameter is set to Yes.
Start Time Time first job in the specified time window started.
End Time Time the last job in the specified time window stopped.
Jobs Included
(Summary Report only) Lists the number of jobs included in
the report.
Jobs Ended
(Summary Report only) Lists the number of jobs that ended
in the specified time window.