Opex Falcon+ - Page 290

145
Falcon+ Operator Manual
OPEX Corporation
The Stops section lists the following:
Table 6: Reasons for stops
Feeder Jammed
Results when the lower skew detect sensor has
been blocked for a specified period of time. Both
the feed jammed time and feed streaming time
define this period.
Upper Skew Detect
Sensor Blocked
Results when the upper skew detect sensor is
blocked by something when the system is
attempting to start up.
Middle Skew Detect
Sensor Blocked
Results when the middle skew detect sensor is
blocked by something when the system is
attempting to start up.
Lower Skew Detect
Sensor Blocked
Results when the lower skew detect sensor is
blocked by something when the system is
attempting to start up.
System Entry Sensor
Blocked
Results when the system entry sensor is
blocked by something when the system is
attempting to start up.
Vertical Turn Sensor
Blocked
Results when the vertical turn sensor is blocked
by something when the system is attempting to
start up.
Stacker Entry Sensor
Blocked
Results when the stacker entry sensor is
blocked by something when the system is
attempting to start up.
Bin 2 Gate Sensor
Blocked
Results when the bin 2 gate sensor is blocked
by something when the system is attempting to
start up.