146
Falcon+ Operator Manual
OPEX Corporation
Stacker Door Open
Results when the stacker door is detected to be
open during a run or when the system is
attempting to start up.
Transport Door Open
Results when the transport door is detected to
be open during a run or when the system is
attempting to start up.
ScanLink Plug-in
Requested a Stoppage
Results when the ScanLink Plug-in has
requested a stoppage.
Too Skewed
Results when a piece is detected to be too
skewed to pass through the system safely.
Table 6: Reasons for stops (continued)
To Next Page
Loading...
