Optelec ClearReader+ - 6. Power and battery use; Checking the battery status; Charging the ClearReader+ battery; Extending the battery life

Optelec ClearReader
+
English Page 37
Voice
The Voice button in the settings menu opens a list with all available reading voices and languages.
Selecting this button will open the voices list.
To enable a reading voice, select it from the list by using the Back button or Forward button on the
ClearReader
+
or the arrow keys on the feature pack. To select or deselect a voice, press the Play /
Pause button. A checkmark in front of the voice name will indicate if it is enabled. When the voice
is enabled, it will be available under the “Voice” button in the main menu. By deselecting a voice,
the voice will be removed from the available reading voices. The selected reading voices are
always displayed first in the list.