Optelec ClearReader+ - Appendix B: Technical information; Dimensions and Weight; Operating and Storage Conditions

Optelec ClearReader
+
English Page 41
If the ClearReader
+
does not read the whole line of a document / column / table.
 The automatic column recognition may be on. Press and hold the Scan button for 2
seconds to disable the column recognition.
If the ClearReader
+
does not respond to the Scan button.
 Open the camera arm and try it again.
 If the Scan button still does not respond, check if the unit is powered.
If the ClearReader
+
does not respond to any button.
 Make sure the battery is not empty. If the battery is empty, connect the power adaptor to
charge the battery.