Optex iVision+ User Manual

Wireless Video Intercom
Thank you for purchasing the iVISION+ wireless video intercom.
Due to the nature of radio frequency transmission technology, the transmission range,
stability of images, video and sound of the iVISION+ can not be guaranteed at all times.
Performance of this product depends on the environment where the product is being used.
Please carefully read all included documents and test for feasibility before applying
any damages to the installation environment. Keep documents safe for future reference.
For a setup of each device, please refer to individual “Installation Instructions”

Optex iVision+ Specifications

General

Frequency	2.4 GHz
Display	TFT LCD
Connectivity	Wireless
Type	Wireless
Monitor Screen Size	3.5 inch
Power Source (Door Station)	12V DC
Power Source (Monitor)	Rechargeable battery
Audio	Two-way
Operating Temperature	-10°C to 50°C
Weight	Door Station: 150g

Summary

What you can do with iVISION+

Basic features of iVISION+

Explains the basic functionality of the iVISION+ wireless video intercom system.

Expanding iVISION+ with additional units

Details how to expand the iVISION+ system with extra units and third-party equipment.

Overview of iVISION+ devices

Handheld Monitor Unit (IVP-HU)

Describes the Handheld Monitor Unit (IVP-HU), its charging, and status indicators.

Door Camera Unit (IVP-DU)

Details the Door Camera Unit (IVP-DU), its camera module, IR LEDs, and push button.

Gateway Chime Unit (IVP-GU)

Explains the Gateway Chime Unit (IVP-GU) for extra chime and relay output.

Before Using iVISION+

Getting ready with iVISION+ system

Ensures Handheld Monitor Units are charged and devices are registered in the system.

How to ON/OFF the system

Provides instructions on turning the Handheld Monitor Unit ON and OFF.

Date and Time Setting

Guide to setting the date and time for the iVISION+ system via the setup menu.

Changing Volumes

Instructions on adjusting chime and sound volumes for the Handheld Monitor Units.

Changing Brightness on Handheld Monitor Unit

Explains how to adjust the screen brightness on the Handheld Monitor Unit.

How to Use Basic Features

Answering to a Door Camera Unit

Step-by-step guide on answering calls from the Door Camera Unit and ending conversations.

Using SNAP function to capture an image

Details how to capture still images from the Door Camera Unit using the SNAP function.

Operating OPEN DOOR function

Instructions on using the OPEN DOOR function with third-party equipment via the Gateway Chime Unit.

Ending ANSWER / BROWSING MODE (Returning to IDLE MODE)

Explains how to terminate calls and return the Handheld Monitor Unit to IDLE MODE.

Auto Recording Images

How “Auto Recording” works

Describes the automatic image capture process when a call is received.

Changing number of images to be captured in “Auto Recording"

Guide to setting the number of images captured during automatic recording.

Timings for capturing images

Details the specific timings for capturing images during the auto recording process.

Handling Stored Images

Viewing Images

Instructions on how to view stored images on the Handheld Monitor Unit.

Deleting Stored Images

Provides steps for deleting selected or all stored images from the unit.

Viewing Images from Your PC

Explains how to connect the unit to a PC to retrieve and manage stored image files.

Other Settings

Talk Switching Mode Setting

Details the different talk switching modes (Manual, Auto) for conversations.

Sensor Alert Enabling/Disabling Setting

Guide to enabling or disabling sensor alerts triggered by motion detectors.

Door Open Duration Setting*

Sets the duration for the NO/NC terminal output for door lock or garage activator.

Frequently Asked Questions

Trouble Shooting