Optex VX-402 - Page 12

7-2.Day/Night Mode (VX-402REC only)
The detector will automatically change messages from that for the daytime to that for the night-time and
vice versa.
Daytime : Message A \
Night-time: Message B ~~ O
. y . : x -
ho
° si |
KR Caution! . Warning!
(Message A} (Message B)
Voice Mode Switch
7-3.Arm/Disarm Mode (VX-402REC only)
The detector will sound different messages when it is set for the armed mode or disarmed mode.
Armed : Message A
Disarmed: Message B
Conttot Panel
|
,--- Control Panel
ARMED DISARMED
Warning!
Caution!
(Message B)
(Message A)
bea
Voice Mode Switch
Non-Voltage Contact Control Voltage Control
Wiring to PGM Programmable Output
Wiring between Power( jand Voice Contorol Input
-—Control Panel
Control Panel
Non-Voltage Contact Output PGM Output |
so ° i
Voice Contorol Input Voice Contorol Input
(Insel
Detector
Settirg|
~+ARM
ARM
Contol Panel Nor-Vottage Contact Control Voltage Control Non-Voltage Contact Control Voltage Controt
Armed DCO- 1V DC 5- 18V DC 5 - 18V DC O- 1V
Disarmed DC 5 - 18V DC O- Vv DCO- 1V OC 5 - 18V
7-4.Sequential Message Mode (VX-402REC only)
The detector automatically changes messages from A to B if the times of detection in the covered
area exceed a preset count in a given duration of time.
Message A for normal detection.
Message B for unusual detection where the above condition is met.
rh
wo Caution! Warning!
BK
(Message
A}
(Message
B)
Voice Mode Switch
A.