Optex VX-402 - Page 2

—— Safety-Related Precautions
«Before installation, make sure to read this instruction manual carefully for safe and effective product
operation.
-After reading this installation manual, make sure to keep it in a convenient place for future use.
. This icon denotes a situation involving the risk of serious
Z\Warning injury or even death, if the warning given is ignored.
. This icon denotes a situation involving the risk of serious
Z\ Caution injury or damage to property if the warning given is ignored.
This icon indicates actions to be avoided. Details of the actions to be
avoided are written beside or near icon.
Qe This icon indicates instructions that should be strictly followed.
. Never use this product for any application except purpose for detecting
Z\Warning moving target such as a human or a car. In addition, never use for any S
activation for a shutter or other. It may cause hazards.
. To avoid the risk of electric shock, never touch the main body of the product Qe
Z\Warning
with
wet
hands.
(Also,
if
the
product
is
wet
after
rain
do
not
touch
it.)
ZN
. Never attempt to disassemble or modify the product, which
Z\Warning
increases
the
risk
of
fire
or
damage
of
the
product.
. Never attempt to connect the terminals to units which reguire higher
Z\Warning ‘ power supply or current draw than its rating. It increases the risk of fire or
damage to the product.
. Avoid applying water in directly from brackets, houses, or otherwise
A\ Caution
splashing water directly onto the product. It increases the risk of damaging
the product.
OO
OW
. Clean and inspect the device periodically for safe operation.
Z\ Caution lf any defect is detected, ask your local Supplier to repair the device.
[7.INSTALLATION HINTS |
1.Install the sensor perpendicular to the ground to If the sensor is installed with some angle to the ground,
making upper detection area parallel to the ground. —_ operational reliability of the sensor may be decreased.
2.Installation height is 0.8m-1.2m (2.7ft-4ft) 3.Mount the sensor so that a majority of traffic flow is
across the detection pattern.
1
Bn
al
~<
| ; 0.8m-t.2m ‘
(2.7ht-att)
a
4.VX-402
is
designed
to
protect
any
light
disturbances.
5.Avoid
pointing
the
sensor
towards
moving
objects
However,
too
much
light
may
cause
unstable
(Le.
swaying
trees,
bushes,
flags,etc.).
If
moving
condition
with
the
sensor,
such
as;
strong
sunlight
objects
are
unavoidable,
please
refer
to
directed
or
reflected
exactly
into
the
sensor's
field
Trouble
Shooting
reference
for
proper
installation.
of view. It is recommended to avoid such installation.