2
Configuring the Bluetooth demo application
Minimum required OS version
This demo application requires the following minimal OS version: RBGV0204. If this
application was already installed on arrival the minimal (or a newer) OS version
should already be installed.
If you want to check the currently installed OS and application version it is possible
to transmit both versions by USB-VCP by reading the 'Z1' menu label (See
Universal menu book chapter 7). It's also possible to use Appload (Utilities > Show
software version) to check the OS version.
Software updates
In the future more features and bug fixes are likely to be implemented into the OS of
the OPN2002 and this application. To find out if there are software updates
available, please check our web site. All available software and documentation for
the OPN2002 can be found under:
'Service and support' > 'Software' / 'Manuals' > 'OPN2002' at
www.opticon.com.
Supported defaults
The following default settings are supported.
(The labels below can be read without reading any SET/END labels)
Bluetooth VCP *
(default)
Bluetooth HID *
* If you only have a OSE Universal menu book available which doesn't list 'C02' or
'C05' as supported defaults, it's possible to use RS232 ('U2') or Bluetooth ('SO')
instead of 'C05' and USB-HID ('SU') instead of 'C02'.
To Next Page
Loading...
Need help?
General
