CRYO-LINE Manual for installation and use
OPTIKON 2000
Code 131002 EN 2014-02-06 Rev.F
4. SYMBOLS
The table below shows some I.E.C. approved symbols and their meanings. In the absence
of sufficient space, these symbols are often used on medical instruments to enable quick
and simple communication of information and warnings. At times two or more symbols
are combined together in order to obtain special meanings.
These are the symbols used on the CRYO-LINE label. Before using the unit, familiarize
yourself with the symbols and definitions provided in the table.
SYMBOLS PUBLISHED BY IEC
SYMBOL
DESCRIPTION
MANUFACTURER (AND DATE OF
MANUFACTURE, WHERE
APPLICABLE)
ALTERNATING CURRENT
WARNING
OPEN (DISCONNECTED FROM
MAINS)
CLOSED (CONNECTED TO MAINS)
TYPE BF APPLIED PART
SEPARATED WASTE COLLECTION
FOR ELECTRICAL/ELECTRONIC
EQUIPMENT
TEMPERATURE MEASUREMENT
CONNECTION
EQUIPOTENTIALITY
FOLLOW INSTRUCTIONS FOR USE
SEE OPERATING INSTRUCTIONS
To Next Page
Loading...
