CRYO-LINE Manual for installation and use
OPTIKON 2000
Code 131002 EN 2014-02-06 Rev.F
DIMENSIONS
Height ................................ 172 mm
Width................................. 393 mm
Depth ................................ 470 mm
Weight ............................... 10 Kg
NOTES
1) The weight and dimensions indicated are approximate.
2) Specifications subject to variations without advance notice.
5.4 EMC TABLES
5.4.1 GUIDANCE AND MANUFACTURER’S DECLARATION – ELECTROMAGNETIC
EMISSIONS
The Cryo-Line is intended for use in the electromagnetic environment specified below.
The customer or the user of the Cryo-Line should assure that it is used in such an
environment.
Emissions test Compliance Electromagnetic Environment –
RF emissions
CISPR 11
Group 1
The Cryo-Line uses RF energy only for its
internal function.
Therefore, its RF emissions are very low
and are not likely to cause
any
interference in nearby electronic
equipment.
Class B
The Cryo-
Line is suitable for use in all
establishments including domestic
establishments and those directly
connected to the public low voltage
supply network that supplies b
used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
fluctuations/Flicker
emissions
Complies