OPTIKON CRYO-LINE - Troubleshooting Guide; Warnings and Error Messages

CRYO-LINE Manual for installation and use
OPTIKON 2000
Code 131002 EN 2014-02-06 Rev.F
10-1
10. TROUBLESHOOTING GUIDE
10.1 WARNINGS AND ERROR MESSAGES
On the LCD display, the CRYO-LINE unit displays warnings and error messages to inform
the operator of situations the may require special attention.
The code and relative meaning of the error appear in the top centre part of the LCD
display.
These warnings and error messages are summarized in the table below.
ENGLISH
WARNING
ERROR
MESSAGE
X
Err 01 Test E1-EV4 failed
X
Err 02 Test Loading failed
X
Err 03 Test EV3 failed
X
Err 04 Test EV3b failed
X
Err 05 Test EV2 failed
X
Err 06 High pressure
X
Err 07 Low pressure
X
Err 08 Footswitch pushed without the probe
X
Err 09Accidental probe disconnection
X
Err 10 Thermocouple disconnection/failure
X
Err 11 Preset T cannot be reached