38
Clearing the Programmed
Sequence
The CD changer saves a programmed
sequence as long as power is sup-
plied to the CD changer. To clear a
programmed sequence, press
STOP
or
CLEAR
when a CD is not playing
and CD is the selected function.
CD CARE TIPS
Even though a CD is very durable, you
should handle it with care.
• Keep the CD inside the CD
changer or in its protective case or
sleeve when you are not playing
it.
• Handle a CD by its edges to avoid
fingerprints which can prevent the
CD changer’s laser beam from
accurately reading the CD. Your
local RadioShack store sells a
suitable CD cleaner kit.
• Do not write on either side of the
CD, particularly the non-label
side. (Signals are read from the
non-label side.)
• Keep the CD dry. A water drop
can act as a lens and affect the
laser beam’s focus.
• If a CD skips or the CD changer
displays
DISC
ERROR
when you
try to play it, the CD might be
scratched. Your local RadioShack
store sells a Scratch ’n Fix kit
(Cat. No. 42-127) that might help
remove the scratch and stop the
skip (see “Troubleshooting” on
Page 46).
• Never use chemicals such as
record cleaning sprays, anti-static
sprays or fluids, benzene, or thin-
ner to clean CDs. These chemi-
cals will permanently damage the
CD’s plastic surface.
13-1293.fm Page 38 Wednesday, July 14, 1999 6:49 PM
To Next Page
Loading...
