1.2.9.1. IP-65 Requirements
Below you can find the parts for the encasing which are needed to fulfill the
requirements for IP-65.
All these parts can be ordered by TAKACHI:
1x box BCAK 203013G or BCPK 203013S,
1x plate BMP 2030P,
1 x screws (20pcs) MT4-8T,
1x bracket (2x4 pcs) BLF-2G(PC-GF) or CK-26P (metal SS)
3x cable gland MG-12S (3 inputs)
33
To Next Page
Loading...