Optoma EP776 - Rod Adjustment

EP776 Series/EP782 Series
Condential 2-23
2-29 Rod Adjustment
1. Environment adjustment
- The distance between the engine and the
screen is 1.91M
- This process should be done at a dark
environment. (under 5 Lux)
2. Procedure adjustment
- Change the screen to “white screen.”
- Adjust the screws by using the rod on
the engine module to readjust the image.
(adjust until the yellowish or bluish parts
disappeared.)
3. Abnormal image inspection
- It should not have any abnormal color at the
rim of the image by estimating through the
eyes.
Note: - To avoid over adjust the rod.
- After the opration,please use the glue to
xed the screws.