Optoma HD83 - Page 39

English
39
User Controls
Auto 235: When “Auto 235” is enabled, the projector will
automatically detect when a 2.35:1 ratio presentation is shown
and will activate the trigger on this port which, in turn, can be
used to activate a motorised anamorphic lens assembly. The
“Auto 235” setting and a motorised anamorphic lens assembly
can be used in this way to provide a fully automated “Constant
Height” projection system.
Auto 3D: When “Auto 3D” is enabled, the projector will auto-
matically detect when a 3D image is shown and will activate
the trigger on this port.

