Optoma HD83 - SYSTEM | Lamp Settings; Lamp Mode; Lamp Reset

English
40
User Controls
Lamp Hour
Display the cumulative lamp operating time.
Lamp Reminder
Choose this function to show or to hide the warning message
when the changing lamp message is displayed. The message will
appear up 30 hours before suggested replacement of lamp.
Lamp Mode
Bright: Choose “Bright” to increase the brightness.
STD: Choose “STD” to dim the projector lamp which will lower
power consumption and extend the lamp life.
Image AI
Image AI improves the contrast of the picture by optimizing the
brightness of the lamp according to the picture content.
Lamp Reset
Reset the lamp life hour after replacing the lamp.



SYSTEM | Lamp Settings
“Lamp Mode” can
separately have
different settings
for 2D and 3D.

NOTE