Optoma ML1050ST+ - Page 51

51
English
Note:
- If the rst 2 characters of lename are 00~99, the play sequence will start from 00,01,02
until 99.
- If there are two les named “00”, the play order will start from the Media le stored in the
microSD card (but the reboot sequence is unchanged). If it is difcult to dene the playback
sequence, please change the lename (other than “00”).
- If the rst two characters of the le name are not numbers (other characters), no sorting is
performed. The order of the les will start from the Media le stored in the microSD card. If
it is difcult to dene the play sequence, please change the lename that begins with the
number 00~99.
- In addition, if the microSD card has a combination les of music, photos, and videos, the
playback method is as follows:
1. If there is a video in the le, Signage will only play the video le.
2. If there are photos in the le, Signage will only play photo les.
3. If there are photos and music in the le, Signage will play photo les and play music in
the background.
The play sequence is also depending on the le sorting method.
5. Auto-disable playback info
Due to avoid redundant information for signage application, the system will auto-
disable “playback info window” (pause/start/next/previous/progress bar…) during
signage mode.
6. Error handling
If the system gets an un-supported video le in le list, the system will skip this le.
7. Remote and keypad handling
During “signage mode”, touchpad and “Up”, “Down”, “Left”, “Right”, “Enter” keys of the
remote control are NOT working. Other keys of the remote control are working.