Optoma UHD60 User Manual

English
15
SETUP AND INSTALLATION
Adjusting the projector image
Image height
The projector is equipped with elevator feet for adjusting the image height.
1. Locate the adjustable foot you wish to adjust on the underside of the projector.
2. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector.
Tilt-Adjustment Feet
Tilt-Adjustment Ring
Zoom, lens shift, and focus
 To adjust the image size and position, do the following:
a. Push down rmly on the middle of the top cover to unlock the latch. Then open the top cover.
Zoom Lever
Lens Shift
b. To adjust the image size, turn the zoom lever clockwise or counterclockwise to increase or decrease
the projected image size.
c. To adjust the image position, turn the lens shift dial clockwise or counterclockwise to adjust the
position of the projected image vertically.

Optoma UHD60 Specifications

General

Noise Level	25 decibels
Resolution	4k (2160p)
Contrast Ratio	1000000:1
Aspect Ratio	16:9
Throw Ratio Range	1.39 - 2.22:1 (with tolerance +/- 5%)
HDR	yes
Keystone Effect	no
3D	no
Minimum Screen Size	26.45 inches
Maximum Screen Size	302.2 inches
Focus Adjustment	manual
Optical Zoom	1.6x
Digital Zoom	yes
Minimum Distance	4.2 feet
Maximum Distance	30.5 feet
HDMI 2.2 Ports	1
USB Ports	1
RS-232 Port	1
Video Input	hdmi, vga
Inputs	3.5mm audio, ethernet, hdmi, vga
Sound Mode	stereo
Built In Speakers	yes
Speakers Output	4 watts
Remote Control	yes
OS Compatibility	mac, windows

Weight and Dimensions

Depth	13 inches
Height	6 inches
Width	19.6 inches
Net Weight	16 pounds