Optoma UHD60 User Manual

English
45
MAINTENANCE
Replacing the lamp
The projector automatically detects the lamp life. When the lamp life is nearing the end of use, a warning message
will appear on the screen.
Warning
Lamp Warning
Lamp life exceeded.
When you see this message, please contact your local reseller or service center to change the lamp as soon as
possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp.
Warning: If ceiling mounted, please use caution when opening the lamp access panel. It is
recommended to wear safety glasses if changing the bulb when ceiling mounted. Caution must be used
to prevent any loose parts from falling out of projector.
Warning: Lamp compartment is hot! Allow it to cool down before changing lamp!
Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The
bulb may shatter and cause injury if it is dropped.

Optoma UHD60 Specifications

General

Noise Level	25 decibels
Resolution	4k (2160p)
Contrast Ratio	1000000:1
Aspect Ratio	16:9
Throw Ratio Range	1.39 - 2.22:1 (with tolerance +/- 5%)
HDR	yes
Keystone Effect	no
3D	no
Minimum Screen Size	26.45 inches
Maximum Screen Size	302.2 inches
Focus Adjustment	manual
Optical Zoom	1.6x
Digital Zoom	yes
Minimum Distance	4.2 feet
Maximum Distance	30.5 feet
HDMI 2.2 Ports	1
USB Ports	1
RS-232 Port	1
Video Input	hdmi, vga
Inputs	3.5mm audio, ethernet, hdmi, vga
Sound Mode	stereo
Built In Speakers	yes
Speakers Output	4 watts
Remote Control	yes
OS Compatibility	mac, windows

Weight and Dimensions

Depth	13 inches
Height	6 inches
Width	19.6 inches
Net Weight	16 pounds