Optoma W402 - Warning Indicator

18
English
Installation
Contact the 
nearest service
center if the
projector displays
these symptoms.
See pages
76-77 for more
information.
Warning Indicator
When the warning indicators (see below) come on,
the projector will automatically shutdown:
 “LAMP” LED indicator is lit red and if “On/Standby” indicator
ashes red.
 “TEMP” LED indicator is lit red and if “On/Standby” indicator
ashes red. This indicates the projector has overheated.
Under normal conditions, the projector can be switched
back on.
 “TEMP” LED indicator ashes red and if “On/Standby”
indicator ashes red.
Unplug the power cord from the projector, wait for 30 seconds
and try again. If the warning indicator light up again, please
contact your nearest service center for assistance.